Chapter 2 Using Your ZoomAir USB Client
13
A dialog box similar to the following displays.
By default, all ZoomAir products have WEP disabled. WEP, or
Wireless Equivalent Privacy, is a form of data encryption intended
to prevent unauthorized wireless clients from accessing data
transmitted over the network. If you decide you want to enable
WEP, turn to page 24 for instructions.
The default
Network Type
is
Infrastructure
—this mode uses an
Access Point or Gateway to access a company network or the
Internet.
If
Infrastructure
is the mode you want, you don’t have to do
anything else. Note: All wireless clients associating to any Access
Point need to have the same ESS ID; because the default ESS ID is
any
, your USB Client will automatically associate to any ZoomAir
Access Point or Gateway in the vicinity.
Click
OK
to close the WLAN Utility dialog box and you’re done!
You can now use your USB Client to communicate wirelessly.
If you want to select another mode, please turn to page 23 in
Chapter 4, Advanced Features
.
