14
15
ZOOM MRS-1044 ver 1.2
ZOOM MRS-1044 ver 1.2
Creating
an
Audio
CD
• If you press the [EXIT] key instead of the [ENTER] key, the
display returns to the condition of the previous step.
• The fastest writing speed supported by the connected
CD-R/CD-RW drive will automatically be selected.
10.
When writing is complete, press the [EXIT] key.
The system returns to the condition of step 5. To add more audio data, select
the project with the desired source data and then repeat the above steps.
• When a new track is added, a pause of 2 seconds is created
automatically.
• As long as the CD-R/CD-RW disc has not been finalized, the
disc cannot be played on an ordinary CD player. (For information
on how to audition a non-finalized CD-R/CD-RW disc, refer to
the next section.)
11.
To terminate the write process and return to the main screen,
press the [EXIT] key several times.
Playing an Audio CD
To play an audio CD inserted in the CD-R/CD-RW drive, proceed as
follows. This method can also be used to audition a CD-R/CD-RW disc to
which audio data were written.
A non-finalized CD-R/CD-RW disc cannot be played by any other
method.
1.
Verify that the CD-R/CD-RW drive is properly connected to the
MRS-1044 and that a suitable disc is inserted.
2.
In the main screen, press the [PROJECT/UTILITY] key.
3.
Use the cursor [
E
]/[
R
] keys to make the display indicate
"UTILITY CD-R/RW", and then press the [ENTER] key.
If the above menu does not appear, the MRS-1044 has not
properly recognized the CD-R/CD-RW drive. Check the power
on/off condition of the drive and the SCSI connection.
NOTE
NOTE
Creating
an
Audio
CD
4.
Use the cursor [
E
]/[
R
] keys to make the display indicate
"CD-R/RW PLAYER", and then press the [ENTER] key.
The display indicates the following information.
(1)Track number
Indicates the number of the track on the audio CD or CD-R/CD-RW
disc.
(2)Playback method
Indicates the currently selected audio CD playback method. "D" stands
for digital playback and "A" for analog playback.
(3)Finalize status
When a "*" symbol is shown here, a non-finalized CD-R/CD-RW disc
is inserted.
(4)Current location
The location in the current track is shown here in hours (H), minutes
(M), and seconds (S).
5.
Use the FF [
Y
] key and REW [
T
] key to select the track to be
played.
While the above indication is shown, the FF [
Y
] and REW [
T
] keys
can be used to select the track on the CD. The FF [
Y
] key selects the
next track and the REW [
T
] key selects the previous track.
6.
Use the cursor [
Q
]/[
W
] keys to select the playback method.
Each push of the cursor [
Q
]/[
W
] keys toggles between the following
two methods.
●
D (Digital playback)
The digital audio signal of the CD is read into the MRS-1044 and
PLAYER
TRK01 D
(1) (2) (3)
(4)