34
35
ZOOM MRS-1044 ver 1.2
ZOOM MRS-1044 ver 1.2
Changing
the
Length
of
a
V
-take
(Trimming)
The start position and end position of a recorded V-take can be adjusted, to
cut unneeded waveform data. This is useful for example to remove silent
portions from a V-take before writing it to CD-R/CD-RW disc.
1.
In the main screen, press the [PROJECT/UTILITY] key.
2.
Use the cursor [
E
]/[
R
] keys to make the display indicate
"UTILITY TR EDIT", and then press the [ENTER] key.
The track edit menu appears.
3.
Use the cursor [
E
]/[
R
] keys to make the display indicate
"TR EDIT TRIM", and then press the [ENTER] key.
The screen for selecting the track/V-take appears.
4.
Use the dial and the cursor [
E
]/[
R
] keys to select the
track/V-take for trimming.
In the indication "TR xx- yy", "xx" stands for the track number and
"yy" for the V-take number. Use the dial to select the track number (1
– 10) and the cursor [
E
]/[
R
] keys to select the V-take number (1 –
10).
Turning the dial further to the right when track 10 is selected brings
up the following indication.
This screen serves for selecting dual odd/even tracks (1/2, 3/4, 5/6,
7/8, 9/10). When dual tracks are selected, the currently selected V-take
for each track is automatically selected for trimming.
TrimSrc
TR1/2
TrimSrc
TR 1- 1
Formatting
an
External
Storage
Device
The MRS-1044 can format a connected hard disk or media in a connected
ZIP or MO drive. This is required before using ZIP or MO media or a hard
disk for the first time.
When formatting is carried out, all data present on the media are lost
and cannot be restored. Take care not to accidentally format a disc
which contains data that you wish to keep.
1.
Verify that the SCSI device is properly connected to the
MRS-1044.
2.
When using a MO or ZIP drive, make sure that a suitable disc
is inserted.
3.
In the main screen, press the [PROJECT/UTILITY] key.
4.
Use the cursor [
E
]/[
R
] keys to make the display indicate
"UTILITY BACKUP", and then press the [ENTER] key.
If the above menu does not appear, the MRS-1044 has not
properly recognized the SCSI device. Check the power on/off
condition of the device and the SCSI connection.
5.
Use the cursor [
E
]/[
R
] keys to make the display indicate
"BACKUP FORMAT", and then press the [ENTER] key.
The indication "FORMAT SURE?" appears on the display, to verify
the formatting process.
6.
To execute the formatting process, press the [ENTER] key. If
you wish to cancel the process, press the [EXIT] key instead.
When formatting starts, the indication "FORMAT wait..." appears on
the display.
When formatting is finished, the display indication changes to
"FORMAT COMPLETE".
7.
To return to the main screen, press the [EXIT] key several
times.
NOTE
NOTE
Formatting an External Storage Device
Changing the Length of a V-take (Trimming)