MRS-1044
Version
1.2
F
eatures
When power is turned on in this sequence, the MRS-1044 reads a
program from the CD-ROM and starts up in a special mode called
"CD-ROM mode". When the MRS-1044 starts in this mode, the
indication "Ver Up to 1.20?" appears on the display.
If power is turned on in the reverse sequence, the MRS-1044 will
start up in normal mode, and system update is not performed.
3.
Press the [ENTER] key of the MRS-1044.
The display now shows the indication "Ver Up Sure?".
4.
To perform the update, press the [ENTER] key once more.
The system update process begins. When the process is completed, the
indication "Ver Up Done" appears on the display.
5.
When the update process is complete, remove the "Version
Update Disk" from the CD-R/CD-RW (CD-ROM) drive, and
then turn power off in the sequence MRS-1044
➔
CD-R/CD-
RW (CD-ROM) drive.
When you next turn the MRS-1044 on again, it will start up in normal
mode.
The same procedure can also be performed if you insert the
"Recovery Disc" instead of the "Version Update Disk" into the CD-
R/CD-RW (CD-ROM) drive. Note that this will delete all projects
created by the user and restore the MRS-1044 to the factory
default condition. Be careful not to mix up these discs.
NOTE
Ver Up
Done
Ver Up
Sure?
NOTE
Ver Up
to 1.20?
Updating
the
MRS-1044
to
Version
1.2
MRS-1044 Version 1.2 Features
This section describes additional features of the MRS-1044 which are
available in Version 1.2.
●
Audio CD creation
Using a CD-R/CD-RW drive connected to the SCSI connector of the
MRS-1044 (with SIB-01 installed), you can create an audio CD. Audio
data for up to 99 songs can be stored on a single CD-R/CD-RW disc,
provided there is enough space on the disc.
An audio CD created in this way can also be played on a regular CD
player after the finalizing operation has been performed.
●
Project backup/restore
You can copy any project of the MRS-1044 to a CD-R/CD-RW drive,
ZIP drive, MO drive, hard disk or other device connected to the SCSI
connector of the MRS-1044 (with SIB-01 installed). This is convenient
for creating backups of important projects. A backed-up project can be
restored to the MRS-1044 at any time. When using a drive with
removable media such as MO or ZIP, or a CD-R/CD-RW drive, large
projects can be split up to span multiple media for backup and restore.
●
V-take trimming
A new option is added to the track edit menu, allowing fine adjustment
of V-take start position and end position. For example, when creating an
audio CD, silent passages at the start or end of the V-take can be cut.
7
ZOOM MRS-1044 ver 1.2
6
ZOOM SIB-01