Other Functions
ZOOM GFX-3
16
Adjusting the expression
pedal
The expression pedal is adjusted for optimum
operation at the factory, but sometimes,
readjustment may be necessary. If pushing the
pedal fully down does not have a strong effect,
or if the volume or sound changes excessively
even when the pedal is only lightly pushed,
calibrate the pedal as follows.
1.
Hold down the [PEDAL] key while
turning power to the GFX-3 on.
The indication "dn" appears on the display.
2.
Fully raise the expression pedal
and press the [STORE] key.
The indication "UP" appears on the display.
3.
Push the expression pedal fully
down and release it.
4.
Press the [STORE] key.
The adjustment is complete, and group/bank
display for the patch appears again.
HINT
• The position of the pedal in step 3
determines the module on/off switching
point. If you want the pedal to perform on/
off switching with a lighter touch, set the
pedal in step 3 to a somewhat higher
position.
•
If the indication "Er" is shown, repeat the
procedure from step 2.
Pedal fully raised
Push strongly, so that
pedal touches here.
When foot is lifted,
pedal returns slightly.
En-GFX3.book 16 ページ ２００４年１１月８日 月曜日 午後４時３０分
