manualshive.com logo in svg

Zoom F6, Руководство по эксплуатации, Страница: 96 / 199

Поделиться
Скачать
Zoom F6 Скачать руководство пользователя страница 96

96

Linking inputs as a stereo pair

■

 MS stereo format overview

This method takes input from a direction-
al mid mic, which captures sound in the 
center, and a bidirectional side mic, which 
captures sounds from the left and right, 
and converts it to stereo.
The stereo width can be changed as de-
sired by adjusting the side mic level.
Since this method can capture a wide 
stereo image, it is ideal for recording 
large open spaces with numerous sound 
sources, including orchestras, live con-
certs and soundscapes.
This technique is also extremely effective 
when you want to adjust room ambience. 
Since it offers a high degree of freedom, it is used not only in studios 
but also for a wide range of recording, even for rehearsals and live per-
formances.

Mid mic

Side mic

Phase

S+

Master

Pan

Phase

S-

Pan

Phase

M

Pan

L R

1.

 Press  .

2.

 Use   and 

 to select 

INPUT

, and press 

.

3.

 Use   and 

 to select 

Link 

Settings

, and press 

.

By enabling the stereo link for tracks 1/2, 3/4 or 5/6, the corresponding Inputs (1/2, 3/4 or 5/6) can be handled as a stereo pair.
When linked, Input 1, 3 or 5 will be the left channel and Input 2, 4 or 6 will be the right channel.

Содержание F6








































































































































































































Отзывы:

Нет отзывов