Zoom F6 Скачать руководство пользователя

Страница: 16 / 199

Turning the power on and off

■

Turning the power on

Press and hold

briefly.

The ZOOM logo appears and the power turns on.

NOTE

•

• The first time the power is turned on after purchase, the date/time must

be set (

→

P. 18). This setting can also be changed later.

•

• If “No Card!” appears on the display, confirm that an SD card is inserted

properly.

•

• If “Card Protected!” appears on the display, the SD card write-protection is

enabled. Slide the lock switch on the SD card to disable write-protection.

•

• If “Invalid Card!” appears on the display, the card is not formatted cor-

rectly. Format the card or use a different card. Formatting SD cards
(

→

P. 175)

■

Turning the power off

Press and hold

briefly.

NOTE

Keep pressing it until the ZOOM logo appears on the LCD.

Содержание F6








































































































































































































Результаты поиска

Содержание F6

Отзывы:

Похожие инструкции для F6

Бренды по названию

Популярные бренды

Zoom F6, Руководство по эксплуатации

Результаты поиска

Содержание F6

Отзывы:

Похожие инструкции для F6

Бренды по названию

Популярные бренды