Zoom F6 Скачать руководство пользователя страница 183

Страница: 183 / 199

183

■

Recording/playback trouble

◆

There is no sound or output is very quiet

• Check the connections to the monitoring system and its volume setting.

• Confirm that the volume of the

is not too low. (

→

P. 33)

◆

Sound from connected equipment or inputs cannot be

heard or is very quiet

• Check the input level settings. (

→

P. 25)

• If a CD player or other device is connected to an input jack, raise the out-

put level of that device.

• Check the input signal monitoring settings. (

→

P. 76)

• Check the phantom power and plug-in power settings. (

→ P.•78,•

P. 92)

• Check the headphone and line output routing settings. (

→

P. 106,

P. 109, P . 110)

◆

Recording is not possible

• Confirm that the status indicators are lit red.

• Confirm that the SD card has open space. (

→

P. 171)

• Confirm that an SD card is loaded properly in a card slot.

• If “Card Protected!” appears on the display, the SD card write-protection

is enabled. Slide the lock switch on the SD card to disable write-protec-

tion.

◆

The recorded sound cannot be heard or is very quiet

• Confirm that the volume levels of the tracks are not too low. (

→

P. 52)

• Confirm that the status indicators are lit green during playback.

■

Other trouble

◆

Computer does not recognize it even though it is connect-

ed to the USB port.

• Confirm that the operating system is compatible. (

→

P. 136)

• The operation mode must be set on the

to allow the computer to rec-

ognize the

. (

→

P. 138)

Appendix

Troubleshooting

If you think that the is operating strangely, check the following items first.

Содержание F6








































































































































































































Результаты поиска

Содержание F6

Отзывы:

Zoom F6, Руководство по эксплуатации, Страница: 183 / 199

Результаты поиска

Содержание F6

Отзывы: