30
Troubleshooting
The unit will not turn ON
If operating on battery power, connect a cable
t
to the INPUT jack.
No sound or very low volume
Check the connections (
t
ĺ
P5).
Adjust the levels of the effects being used
t
(
ĺ
P11).
Adjust the master level (
t
ĺ
P14).
When adjusting the volume with an expression
t
pedal, make sure that a suitable volume setting
has been set with the pedal.
Confirm that the TUNER OUTPUT is not set to
t
"MUTE" (
ĺ
P20).
There is a lot of noise
Check shielded cables for defects.
t
Use only a genuine ZOOM AC adapter (
t
ĺ
P6).
An effect is not working
If the effect processing capacity is exceeded,
t
”PROCESSING LIMIT” appears on the effect
graphic. In this case, the effect is bypassed
(
ĺ
P10).
Batteries lose their charge quickly
Confirm that you are not using manganese
t
batteries. Alkaline batteries should provide
about 20 hours of continuous operation.
Check the battery setting.
t
Set the type of battery being used to enable the
remaining charge to be shown more accurately
(
ĺ
P16).
Due to the characteristics of the batteries, they
t
might be used more quickly in cold.
The expression pedal is not working
well
Check the expression pedal settings (
t
ĺ
P26).
Adjust the expression pedal (
t
ĺ
P27).
