17
ZOOM 607
BASS
Editing
a
Patch
NOTE
NOTE
Changing the
module on/off
setting
Press both [
W
] / [
Q
] foot
switches together.
This switches the effect module
that was selected with the
PLAY/EDIT selector on or off.
When the PLAY/EDIT selector
is set to "CONTOUR" or
"TIME", pressing the [
W
] / [
Q
]
foot switches together has no
effect.
The editing changes made in this way are only temporary. When
you return to the play mode and select a different patch, the
settings will revert to the original condition. If you want to keep the
change, store the settings before switching the patch (
→
p.18 ).
Adjust the parameter setting
value
Use the VALUE [+] / [-] keys.
The keys operate as follows.
• Keeping one key depressed:
Value changes continuously.
• Hold down one key while pressing the other key:
Value
increases rapidly.
• Pressing both keys simultaneously:
Switch to next effect
type in same module.
Editing a Patch
16
ZOOM 607
BASS
Editing a Patch
Editing
a
Patch
Lit
Parameter value
Select the effect parameter
The DRIVE module
can also be directly
edited by using the
DRIVE selector and
GAIN [+] / [-] keys
(
→
p. 14).
Terminate the edit mode
Use the PLAY/EDIT selector to select the module
and parameter you want to edit.
Set the PLAY/EDIT selector to "PLAY". The
unit reverts to the play mode.
For information on effect
modules and parameters,
see the section "Effect
Parameters" at the end of
this manual.
The 607 switches to the edit mode and the value of the currently
selected effect parameter appears on the display. When the 607
is in edit mode, a dot is
shown in the bottom right
corner of the display.
Editing means changing the various effect parameter settings of a
patch. Use an existing patch as a starting point and adjust the
parameters to create your own original sound.
