9
ZOOM 607
BASS
Selecting
Patches
for
Play
To directly switch the bank
Switch patches
To adjust the
master volume
To switch patches in play mode, use
the [
W
]/[
Q
] foot switches.
You can use the VALUE [+] / [-] keys to directly
switch among the banks A - G.
Keep both VALUE [+] / [-]
keys depressed for more
than 1 second.
While the master volume
setting is shown, pressing
the VALUE [+] / [-] key
changes the setting.
The setting range is 0 - 50. When
the unit is turned off and on
again, the setting will be reset to
40.
When using headphones, the
master volume setting can be
used to adjust the listening
volume.
Selecting Patches for Play
8
ZOOM 607
BASS
Selecting Patches for Play
Selecting
Patches
for
Play
Power-on
Set 607 to
play mode
Immediately after
turning on power to
the 607, the unit will
be in play mode even
if the [PLAY/EDIT]
selector is set to a
different position.
When using the 607 on batteries, plug a shielded cable
with mono phone plug into the INPUT jack of the 607.
When the
[PLAY/EDIT]
selector is set to a
different position,
set it to "PLAY".
The currently
selected bank and
patch number are
shown on the display.
When using the 607
with the AC adapter,
plug the adapter
into the outlet and
plug the cable from
the adapter into the
DC 9V jack on the
607.
Turn power to the
bass amplifier on,
and adjust the
volume to a suitable
level.
Bank
Patch number
To try out the 607, we recommend that you simply play your
instrument while switching patches. This will let you quickly see what
the 607 can do.
