64
out.
Delete All: Delete all settings existed in trigger port table.
Reset: Unselect all settings.
Note:
Only one LAN client can use a particular special application at a time.
After you finish with all settings, please click “Apply” button and the
following message will be displayed on your web browser: Please click
“Continue” to back to previous setup menu; to continue on other setup
procedures, or click “Apply” to reboot the router so the settings will take
effect (Please wait for about 30 seconds while the router is rebooting). If you
want to reset all settings in this page back to previously-saved value, please
click “Cancel” button.
3-2-5. UPnP Setting
This function enables network auto-configuration for peer-to-peer
communications, with this function, network devices will be able to
communicate with other devices directly, and learn about information about
other devices. Many network device and applications rely on UPnP function
nowadays.
Please click “NAT” menu on the left of web management interface, then click
“UPnP”, and the following message will be displayed on your web browser:
There is only one option in this page, please select “Enable” or “Disable” to
Содержание ZSR4124WE
Страница 1: ......