Advance features
24
NOTE: Do not turn on these functions until you clearly understand how to use them and precautions.
Bed auto leveling feature:
This printer is equipped with a
Bed leveling sensor (
PL-08N
)
, with this sensor, you can correct the
unevenness of the hot bed. . For the details please refer to the guide in
“Bed Auto Leveling Feature”
.
Switch on: MENU>>Control>> Configre>> Auto Leveling
Auto retract feature:
The strings issue of the mixed color hot end is often more serious than that of the single color hotend.
Therefore, an automatic retraction feature is set in the firmware. Using automatic retraction can
improve this problem. For the details please refer to
How to set auto retract function
.
Filament run out detection feature (Filament run out sensor is an optional parts):
With these sensors, the printer can pause the printing while one of the filament spool used up, and when
you load a new roll filament, you can continue to print. For the detail please refer to
How to set
filament runout function
. Switch on: MENU>>Control>>Configre>>Runout Sensor
Power loss recovery feature:
While printing from SD card and power is lost, after power on again, the printer will resume to print from
the last layer which printed before power lost. For the detail please refer to
Power loss recovery
feature user guide
.
Switch on: MENU>>Control>> Configre>>PowerLoss Recovery
Auto power shut down feature:
While printing from SD card and the work is finished, the printer will auto shut down after about 3
minutes. For the details please refer to
How to set auto shutdown function
.
Switch on: MENU>>Control>> Configre>> Auto Shutdown
Содержание Z8PM4 Pro
Страница 1: ...Model Z8PM3 4 Pro User Guide...
Страница 15: ...Wiring Block...
