Zonestar Z8PM4 Pro, Руководство пользователя

Страница: 22 / 25

Print your first work
1. Insert the SD card to the SD card socket on the printer ( Fig 1 ).
2. Click “ Print ” on the control panel and choose “ Test gcode\xyz_cube.gcode ” ( Fig 2 ), click the knob
to start printing.
3. Wait until the hotend and hotbed is reached to the setting temperature (Fig 3), the nozzle will
home to the origin position and then move to above of the printing platform and extrude the
filament, use a tweezers to remove the outflow filament (Fig 4) .
4. Double click the knob on the control panel to open a “ Babysteps ” menu (Fig 5) , rotate knob slowly
to fine tune the height of printing platform, watch the distance from nozzle to bed, until the
distance is well (Fig 6). Wait the printing finished, you will get your first works (Fig 7).
5. Wait the hotbed cool (<=25 degree ) (Fig 8) , and then remove the printed object from the hotbed
glass (Fig 9) .
Fig 1
Fig 5
Too far Too close Perfect
Fig 6
Fig 3
200/200 50/50
Fig 2 Fig 4
Fig 7 Fig 8 Fig 9