Zonestar Z8PM4 Pro, Руководство пользователя

Страница: 11 / 25

Debug the Z Movement system
Keep the lead screws parallel to the Z axis profiles as far as possible will help to obtain better
printing quality, please debug them refer to the following steps:
Step 1.
Loosen all the screws a little that fixed the Z motors and T8 copper nut.
Step 2. Synchronous Rotate the couplings to move up the X axis to 1/2 height of the printer.
Step 3. Keep the lead screws parallel to the Z profiles, then tighten the screws that fixed the Z motor
and T8 copper nuts.
Step 4. Install the Z lead screws fix blocks on the top profile after done.
200mm
Loosen
a little
Put in
Fixed
Fixed