Zone Offroad Products F2302, Руководство по установке, Страница: 7 / 12

F2302 Installation - pg. 7
Figure 8C
Figure 8D
14. Install the ball joint into the Zone Offroad upper control arm using the ball joint
press
Figure 9
.
Figure 9A
Step 14 Note:
The flat side on the ball joint hous -
ing must line up with the flat side
on the Zone Offroad control arm.
This will ensure the ball joint is
installed in the proper orientation
for range of motion of the joint.
Be sure NOT to press on the ball
stud, but only press on the ball
joint housing.