Zonair3D AIR MOVE+, Руководство пользователя

Страница: 27 / 34

Switching on the Air Move+
This device is Plug&Play. It does not require any previous configuration.
Once the purifier is connected to the car cigarette lighter socket, the ON/OFF button will faintly glow
(normally, the vehicle should be running).
To turn on the purifier, gently press the ON/OFF switch once and hold for 1 second. The intensity of the
ON/OFF switch light will increase.
By default, the purifier is activated in AUTO mode.
To change the operating mode :
- From AUTO to SILENT, press the ON/OFF button for 1 second.
- From SILENT to BOOST, press the ON/OFF button for 1 second.
- To return to AUTO mode, press the ON/OFF button for 1 second, and so on.
To turn off the purifier, press the ON/OFF button and hold for 2 seconds.
You will hear two consecutive beeps and the indicator light will dim, but will not turn off completely.
Every time you turn off the purifier and as long as the device remains plugged into the power outlet, the
UVC led is activated for 2 minutes. This UVC radiation will inactivate viruses and germs trapped in the ULPA
filter.
Note : Radiation from the UVC LED does not pass through the ULPA filter and the wattage of the UVC LED
used in this equipment has not been shown to be high enough to be considered harmful during this time
period. However, even if you forget to unplug the device when changing the filters, as soon as you remove
the grilles, the input power to the device will be cut off automatically, turning off the device completely.
Air Move+ · Page 27
1
2
3
All functions
in one button