Zonair3D AIR MOVE+, Руководство пользователя

Страница: 26 / 34

Air Move+ · Page 26
Installation and connection of Air Move+
Location and installation:
Pass the straps through the holes located in the base of the
purifi er, as shown in the image.
A. In case of installing the air cleaner in the armrest of the
center or rear console:
- Open and lift the armrest cover.
- Close the buckles and adjust the tightening of the straps
and close it, leaving the buckles placed under the cover so
that when the armrest is returned to its natural position, the
buckles do not interfere with the closing of the cover. Press,
if necessary, to secure the armrest latch to the center console
body.
In this location, the purifi er can be placed with the purifi ed
air outlet directed forwards or backwards.
B. In case of installing the purifi er on the headrest :
- Hug the headrest with the 2 straps
- Close the buckles and adjust the strap to fi rmly hold the
purifi er.
It is recommended to place the straps leaving the buckles on
the side of the headrest, for greater comfort when supporting
the head.
Operation
In the headrest position, its natural position is to direct the
outlet of purifi ed air downwards.
C. In case of installing the purifi er under the front seat:
- Use strong double-sided adhesive tape for proper fi xing.
- Stick at least 2 large strips on the base of the purifi er.
- Place the purifi er on the desired surface, and press to ensure
adherence.
IMPORTANT: In the position under the front seat, there is
no visibility of the purifi er control panel and access may be
uncomfortable to the touch. But, you have the smartphone app to
operate the device conveniently.
Finally, connect the power cable to the car’s 12V cigarette lighter
socket.
IMPORTANT: the power cable included with the AIR MOVE+ is only
suitable for use with 12V DC outlets.
1
3
2