Common Tasks
9650-000820-01 Rev. K
Propaq M Operator’s Guide
2-13
Display Brightness Modes
The monitor can display in three different brightness modes:
•
high contrast with white background (for optimal display in bright sunlight)
•
color with black background (numerics and waveforms are easy to read)
•
night vision goggle (NVG) friendly (display and alarm LEDs prevent interference with
goggles)
Common Tasks
The section contains procedures for the following tasks:
•
“Setting the Date and Time” on page 2-13.
•
“Replacing a Battery Pack on the Propaq M Unit (No Printer)” on page 2-15.
•
“Using Treatment Buttons” on page 2-17
Setting the Date and Time
The Propaq M Set Date and Time screen allows you to set the date the Propaq M will use and
its internal real time clock.
To set the Propaq M unit’s date and time:
1. On the Propaq M display screen navigate to and select the
Date and Time
field. The Set
Date And Time screen displays.
2.
Specify the date by navigating to the date fields (
Month
,
Day
and
Year
) and adjusting as
necessary.
3.
Specify the unit’s time by navigating to the time fields (
Hour
,
Minute
,
Seconds
) and
adjusting as necessary. The selections available in the
Hour
field depend on whether your
unit is configured for a 12 or 24 hour (default) clock.
Note:
For systems with Clock Synchronization enabled, avoid changing the unit’s time
manually except at initial configuration.
4.
When you are done indicating the date and time, select the
Set Date and Time
field to apply
your selections.