9650-000820-01 Rev. K
Propaq M Operator’s Guide
15-1
Chapter 15
Communications
If installed, the Propaq M unit is equipped to communicate through a Wi-Fi access point,
Bluetooth-equipped device, Ethernet cable, or USB cellular modem. You can send data through
a wireless connection to a remote recipient via a ZOLL server configured for your unit or you
can use an Ethernet adapter to transfer data to a PC via an Ethernet cable.
Note:
The Propaq M Unit does not support simultaneous Wi-Fi and Ethernet communication.
The data available to transmit to a remote location includes 12-lead report snapshots (including
trend data) as well as the Disclosure logs for up to 15 cases at one time. The Propaq M unit
continuously stores information in a full disclosure case log for monitored patients. The
disclosure logs contain treatment events, trends, ECG and other continuous waveforms,
monitoring and event snapshots, and 12-lead snapshots and analysis.
Note:
Full disclosure cases, can also be automatically retrieved from the Propaq M unit using
ZOLL RescueNet or ePCR software or saved to a USB device.
You can set up a Bluetooth pairing or temporary wireless access point on the Propaq M unit by
selecting the wireless icon on the display screen. Supervisors can set up permanent
communications configuration, including up to 255 Wi-Fi profiles and up to 3 Cellular
providers in the Setup/Communications menu, which requires a password.Once you have set
up a wireless connection, you can send 12-lead reports or disclosure logs via a ZOLL server.
This chapter describes how to set up and use communications capabilities in the Propaq M unit.
This chapter contains the following sections:
•
•
•
•
•
Supervisor Communications Menu
•
Communications System Messages
Important:
Test all wireless connections after initial setup and prior to use.