Communications System Messages
9650-000820-01 Rev. K
Propaq M Operator’s Guide
15-37
Communications System Messages
The Propaq M unit may display one of the following status messages during the transmission:
System Message
Cause
TRYING TO CONNECT TO
NETWORK
The unit is connecting to the network.
TRANSMITTING
The data transfer is in progress
TRANSMISSION COMPLETE
The data transfer is complete.
TRANSMISSION FAILED
The data transfer has failed.
To correct the problem, check the following:
•
Verify that wireless communications is enabled on your
Propaq M unit.
•
Verify that the Wi-Fi settings are correct in the
Communications setup menu.
•
Verify that the ZOLL server is configured correctly.
•
Verify that your cellular device is configured correctly.
•
Make sure that the Propaq M unit is within range of the
wireless server.
INVALID
CERTIFICATE
FAILURE
The certificate is expired or the trust chain cannot be
established.
HOSTNAME MISMATCH
The certificate common name does not match the host name
for the server to which you are trying to connect. The server
host name and the certificate common name must match
exactly. For example, if the server host name is
“12lsubsvc.zollonline.com” then the common name must be
“12lsubsvc.zollonline.com”. The Propaq M allows you to use
wildcards. So, for the example above, you could use the
wildcard “*.zollonline.com”.
