ZOLL M670SU, Руководство пользователя

Страница: 84 / 224

BIOS Utilities
5 - 2 The Power-On Self Test (POST)
5
The Power-On Self Test (POST)
Each time you turn on the computer, the system takes a few seconds to conduct a
POST , including a quick test of the on-board RAM (memory).
As the POST proceeds, the computer will tell you if there is anything wrong. If there
is a problem that prevents the system from booting, it will display a system summary
and prompt you to run
Setup .
If there are no problems, the Setup prompt will disappear and the system will load
the operating system. Once that starts, you can’t get into Setup without rebooting.
POST Screen
1. BIOS information
2.CPU type
3.Memory status
4.Enter
Setup prompt
appears only during
POST
Note: The POST screen
as pictured right is for
guideline purposes only.
The
POST screen on
your computer may ap-
pear slightly different. If
you disable the
Boot-
time Diagnostic Screen ,
the POST screen will not
appear.
Figure 5 - 1
POST Screen
Phoenix TrustedCore(tm) NB
Copyright 1985-2005 Phoenix Technologies Ltd.
All Rights Reserved
Bios Version: ******
KBC/EC Firmware Version: ******
FSB 166*4MHz DDR533 CL=4T Dual Channel 2T ,CPU ID = 06E8
CPU = 1 Processors Detected, Cores per Processor = 2
Genuine Intel (R) CPU T2300 @ 1.66GHz
632K System RAM Passed
1022M Extended RAM Passed
2048 KB L2 Cache
System BIOS shadowed
Video BIOS shadowed
ATAPI CD-ROM: Optiarc CD-RW CRX880A
Fixed Disk 0: FUJITSU MHV2100BH PL
Mouse intialized
Press <F2> to enter SETUP
1
2
3
4