ZOLL LifeVest 4000, Руководство для пациента

Страница: 39 / 144

Using the LifeVest
Page 3-15
How to read the charger indicator lights
If your charger has indicator lights, those indicators show the status of the battery
and charger.
Indicator What it means What to do
Yellow, blinking,
with audible alarm
Alarm condition 2.
Charger has a problem,
and cannot charge the
battery.
Call ZOLL immediately. Battery is not being charged.
This condition will be accompanied by three beeps every
15 seconds.
Yellow, lit solid, with
audible alarm
Alarm condition 1.
Battery has a problem, but
still might hold a charge.
Call ZOLL. Battery has a problem, and may charge, but will
take longer than normal. Battery can be used, but should be
replaced.
This condition will be accompanied by two beeps at the start
of the alarm.
Green, lit solid
Battery is fully charged,
ready for use in monitor. Leave the battery in the charger until you are ready to
exchange the battery.
Green, blinking
Battery is charging. Leave the battery in the charger. Charging typically takes up
to 4 hours.
Blue, lit solid
Power is being applied to
the charger.
Make sure this indicator lights when you plug in the charger.
This light will continue to stay lit when the other indicators
light. To remove power from the charger, unplug it from the
wall outlet. There is no power switch.
Three icons are
blue, lit solid
Battery is being tested. Let test run. Test verifies battery function as part of normal
routine. Testing can take up to 14 hours. After the test, the
battery will charge as normal. This whole process, of testing
and charging, can take up to 18 hours. If you need to use the
battery sooner, remove the battery from the charger as soon
as the indicator lights blue, then reinstall the battery into the
charger. It will skip the testing and go right to charging, for a
shorter cycle time.