- 34 -
Questions &
Answers
Abnomal Condition
WHOLE GRAIN(BASIC, WHEAT, QUICK WHEAT)
QUESTIONS AND ANSWERS
Abnomal Condition
Status
"HOT" appears.
"LID" appears.
The motor does not operate
during the KNEAD process.
Keys do not operate
The Operation Light goes
on but the unit does not
operate (kneading does not
start).
Beeps keep sounding.
"3:30" flashes and the
Operation Light turns off
during baking/cooking.
The machine makes noise
during use or timer
operation.
The machine rattles during
operation.
Smoke comes out from the
steam vent and a burning
smell is generated.
Cause
The baking pan’s inside temperature is over 104
∞
F. This indication will
appear if you attempt to use the unit continuously.
The baking pan’s inside temperature is over 104
∞
F. This indication
will appear if you attempt to use the unit continuously.
This indication appears if you start the unit with the id remaining open.
For safety reasons, the unit will not start unless the lid is closed
securely.
Close the lid before starting the unit.
The motor protective device is activated due to an excessive load on the
motor.
The unit will automatically resume operation after 30 minutes.
Discard the unfinished bread and start the process again from the
beginning using ingredients that put less load on the motor.
The power plug is disconnected from the outlet.
Plug the unit into the outlet securely.
While "PREHEAT" is indicated, the temperature of ingredients is
adjusted, so kneading does not start.
This does not indicate any malfunction.
The lid is kept open during baking/cooking.
The unit will not operate properly if the lid is kept open. If in the
"Keep Warm" cycle, remove the baked bread immediately and press the
START/RESET key.
Power supply has been discontinued for more than 30 seconds due to
power failure, disconnection of power plug, a defective fuse or circuit
breaker.
Discard the unfinished bread and start the process again from the
beginning using new ingredients.
The sound heard is the motor during the kneading process.
This does not indicate any malfunction.
The baking pan is not installed securely.
Install securely.
Ingredients or baked product collect on the heating element or inside the
unit.
This does not indicate any malfunction. Make sure to clean the unit
after each use. Unplug the unit and allow it to cool before cleaning.