5
·Press
to reconfirm each set item, but the Sewing LED can’t changes its status.
·Press
to turn off the Sewing LED, then each set value of item can be changed
·When the pattern number is 0 (the default setting), pressing
will activate the error “E-10”.
At this time, please press the Reset Key to reconfirm the pattern number.
·Without pressing
, the pattern number, X/Y scale rate, Max Speed and other setting values
will be unable to be recorded.
2.2.2 Confirmation of Pattern Shape
After selecting the pattern, user shall confirm the shape of the pattern.
If the pattern is far away from the presser, the needle will run into the presser, thus breaks the
needle.
1
．
Press
to light up the Sewing LED
2
．
Press
to select
, and then the screen
displays
; step the pedal to
lower the presser and then the screen
displays
.
3
．
In the status of lowering the presser, press
.
4
．
Use
and
to confirm the shape.
The confirmed pattern for sewing shall be in the
permitted range of the presser.
5
．
Press
to lift presser.
6
．
Press
to release the selection of
(select other data item other than
). After that,
press
to end the trial sewing and the