Zoeller 1263, Быстрый старт

Страница: 4 / 9

6
© 2020. All rights reserved.
7
© 2020. All rights reserved.
INSTALLATION INSTRUCTIONS
4
5
6
4. Place the pump inside the basin with the switch
positioned away from incoming water.
5. Be sure the float switch is at least 1 in. away from the
side walls of the basin and free of any obstructions
through the full range of switch motion.
6. Install rigid 2 in. discharge pipe (not included) according
to local, regional, and state codes.
Incoming
water
Switch
Switch
1 in.
Minimum
Discharge
Pipe
INSTALLATION INSTRUCTIONS
7. Use a 2-step PVC glue system (not included) to join
pipe and any fittings needed.
8. Drill a 3/16 in. hole in the discharge pipe above the
pump discharge to prevent air lock. Pumps have a
vent located in the pump, but an additional vent hole
is recommeded. Water stream will be visible from this
hole when the pump is running. The hole must be
cleaned periodically.
9. Install a 2 in. union (not included) above the basin to
allow the pump to be removed for cleaning and service.
Discharge
Pipe
Additional
3/16-in.
Vent Hole
Union
7
8
9