6. Transportation Requirement
Lifting and lowering the cabinet
As shown in the figure
As shown in the figure
· The lifting rope shall go through the four rings; the lifting height shall reach 800mm; in this way, the included angle
formed by the lifting rope will be greater than 60°
· The lifting rope shall have a load-bearing capacity of 2.5T; lifting and lowering operations shall be carried out steady
· The forklift shall meet the gear length A > 1500mm
· 870mm
<
gear width < 1130mm, fork weight 2.5T
· The four forklift hole covers shall be open; the forklift shall extend into the holes, move slowly and operate steadily
6
7