![background image](http://html1.mh-extra.com/html/zodiac/wave-275-roll-up/wave-275-roll-up_owners-manual_4073024008.webp)
8 / 12
INFLATION (EXCEPT HP MODELS)
Activate all valves into inflation position
.
Fit the hose to the foot-pump.
To inflate your boat properly, the bottom side
of the foot-pump must rest on a flat ground
.
Pump evenly to inflate rapidly.
WARNING
DO NOT USE A COMPRESSOR OR A BOTTLE OF COMPRESSED AIR
You can use an electrical air pump – optional equipment (ask your Dealer).
.
INFLATE THE MAIN BUOYANCY TUBE
•
Insert the pump hose end piece
•
Inflate
(pressure = 240 mbars – 3.4 PSI,
reefer to PRESSURE section)
making sure that each
compartment is equal. When correctly inflated, the internal bulkheads (a) are not visible.
WARNING
NEVER INFLATE THE MAIN BUOYANCY TUBE OR THE KEEL AT
A PRESSURE HIGHTER THAN 240 MILLI BARS (3.4 PSI.)
THERE WOULD BE A RISK OF BURST.
NEVER COMPLETELY
INFLATE A
COMPARTMENT TO FULL
PRESSURE IF OTHER
COMPARTMENTS ARE
TOTALLY DEFLATED
a
100 %
0 %
0 %
1
50 %
50 %
50 %
2
100 %
100 %
100 %
INFLATE THE KEEL (SB ONLY)
pressure = 240 mbars – 3.4 PSI
Inflation is over:
fit the valve caps tight (clockwise).
NOTICE :
A slight air-leak before screwing the valve caps is normal.
ONLY THE VALVE CAPS CAN ENSURE FINAL AIR TIGHTNESS
.
Содержание WAVE 275 Roll Up
Страница 15: ...III VI DESCRIPTION DESCRIPTION 275 ROLL UP 10 13 7 6b 12 4 3 16 15 9 8 18...
Страница 16: ...IV VI DESCRIPTION DESCRIPTION 310 HD 2 3 14 4 5 12 13 6a 7 11 10 8 9 18 1 2 3 4 5...
Страница 17: ...V VI DESCRIPTION DESCRIPTION 275 310 AERO 2 3 23 4 14 12 13 6c 7 1 10 8 9 15 16 17 18 11...
Страница 18: ...VI VI DESCRIPTION DESCRIPTION 310 COMPACT 18 7 13 12 4 1 6d 3 16 9 8 17 6d...