![background image](http://html1.mh-extra.com/html/zodiac/wave-275-roll-up/wave-275-roll-up_owners-manual_4073024004.webp)
4 / 12
ASSEMBLY
Choose a smooth and clean surface
IF THE BUOYANCY TUBE WAS STORED AT A TEMPERATURE BELOW
0°C / 32°F, LEAVE IT AT 20°C / 68°F FOR 12 HOURS BEFORE
UNFOLDING.
310 COMPACT
No assembly is required
275 ROLL UP :
Boat deflated, slide the slats in their pockets starting by the closest to the transom. If the slats are
difficult to insert, lubricate it with liquid soap.
275 AERO – 310 AERO : INFLATE THE HIGHT PRESSURE FLOOR
HP INFLATABLE FLOOR DEFLATED
•
•
efore inflating, open out the boat and position the keel on the central band of the bottom and on the
floorboard axis (centered between the positioning pins).
•
FIRST
inflate the keel-floorboard assembly to its rated pressure.
•
Check that the keel inflated perpendicular to the floorboard and that it is still positioned on the
central band of the bottom (otherwise, reposition).
•
Inflate the main buoyancy tube.
•
Press the floorboard down around the edges to fit it into the hollow of the angle.
MAINTENANCE / DISMANTLE OF THE HP INFLATABLE FLOOR
We recommend that you leave the H2P floor in the boat when folding.
To clean perfectly the boat proceed as follow:
Deflate the boat and the floor.
Inflate again the boat a little.
Wash off with clear water and then raise the boat’s nose to evacuate water and sand or rubbish.
Do not separate the keel from the floor nor from the buttom.
Содержание WAVE 275 Roll Up
Страница 15: ...III VI DESCRIPTION DESCRIPTION 275 ROLL UP 10 13 7 6b 12 4 3 16 15 9 8 18...
Страница 16: ...IV VI DESCRIPTION DESCRIPTION 310 HD 2 3 14 4 5 12 13 6a 7 11 10 8 9 18 1 2 3 4 5...
Страница 17: ...V VI DESCRIPTION DESCRIPTION 275 310 AERO 2 3 23 4 14 12 13 6c 7 1 10 8 9 15 16 17 18 11...
Страница 18: ...VI VI DESCRIPTION DESCRIPTION 310 COMPACT 18 7 13 12 4 1 6d 3 16 9 8 17 6d...