![background image](http://html1.mh-extra.com/html/zodiac/vortex-ov-3450/vortex-ov-3450_instructions-for-installation-and-use_4081229014.webp)
H0491600.C - EN - 2015-12
13
3.8 I The remote control (depending on the model)
• Respect the batt ery polarity.
• Do not recharge the batt ery, dismantle it or throw it onto a fi re.
• Do not expose it to high temperatures or direct sunlight.
3.8.1 Switching the remote control on and off
• To switch on: press
.
• To switch off : press and hold
.
Tip: improve the remote control recepti on.
The frequency of the fl ashing of the led located on the remote control indicates the recepti on quality. If the
LED fl ashes quickly, recepti on quality is OK.
For the best communicati on between the control box and the remote control:
-
Positi on the control box on the trolley.
-
Turn the control box towards the pool
-
Removal all large obstacles between the control box and the pool.
3.8.2 Directi ng the cleaner
• The remote control is equipped with movement sensors to direct the cleaner:
: Forward
: Backwards
: Left turn
: Right turn
: Stop
3.8 Taking the cleaner out of the water (depending on the model)
•
Press
. The cleaner moves toward the wall and climbs up to the waterline.
3.8.4 Synchronising the remote control with the control box
By default, the remote control is already synchronised with the control box. If replacing the remote control/control box
or if a synchronisati on problem occurs, follow the steps below:
• Place the remote control
a maximum of 50 cm away
from the control box.
• Connect the control box, check that the display shows the operati ng ti me, and that no cleaning cycle is running.
• Switch on the remote by pressing
..
• Before the remote control switches to standby (around 45 seconds) press the
and
butt ons simultaneously
for 6 seconds.
• Check that synchronisati on was successful by observing the display and the remote LED:
Display on the
control box
Remote LED
Result
Good
0:45
for 2 seconds
Flashing
• Synchronisati on successful.
FAIL
On steady
• Check the distance between the control box and the remote
control is 50 cm maximum.
• Check the remote control batt eries. Replace them if necessary.
If the problem conti nues contact your reseller.