12
ATTENTION JANDY ‘REV L’ OR LATER USERS
It is critical that the controller setting to be set to JANDY L/M if a
controller that is a Jandy Aualink ‘Rev L’ or later, is to be connected. If the
incorrect setting is selected, damage can be caused to the Jandy Aqualink
Control Unit.
CAUTION WHEN WIRING TO A CONTROLLER
IMPORTANT
Wiring of the controller should be completed by an authorised pool
equipment installer.
Before any wiring connections/disconnections ensure mains power is
removed from both the controller and the Zodiac TRi unit.
When connected to a controller, the TRi Chlorine generator acts as the
‘slave’ - responding to requests. This means timer settings are ignored and
the output settings cannot be changed, although all other ‘menu’ functions
are still accessible, except for LOW and BOOST modes.
WIRING TO A CONTROLLER
The following instructions should be read in conjunction with the
installation guide provided with the Controller.
1. Remove silver ‘dress’ cover by pressing
in at the sides where indicated below
and lift.
2. Remove the two screws which attach
the lower cover to the main unit:
CONNECTING TO A CONTROLLER
