11
If you use a Master Control Device
(MCD) to control your pool you will
need to configure your TRi Chlorine
generator to allow “communication”
between the two.
You must set the controller type
on the TRi before making the
wiring connection.
SETTING THE CONTROLLER
(To be done before making a wiring connection)
1.
Switch power to the TRi unit on.
2.
Wait for the start-up sequence to complete.
3.
Press the
button.
4.
Press the
button to scroll down to ‘CONTROLLER’.
5.
Press
to enter the controller menu.
6.
Press
/
to highlight the controller being used.
7.
Press
to save the controller setting.
8.
TRi will return to the main menu.
9.
Press
to return to the operating screen.
CONNECTING TO A CONTROLLER
