The
symbol indicates important information that must imperatively be taken
into account in order to avoid risk of injury to persons or damage to the appliance.
The
symbol indicates useful information.
Description of your pH Perfect
1.1 Identifi cation of parts
The pack contains the items shown and required to install your pH Perfect:
1
pH Perfect controller
2
Wall bracket
3
Wall fi xture kit (2 plugs & 2 screws)
4
Polyethylene inlet tube (5 meters)
5
Intake pipe with 2-meter PVC tube and 3-meter cable
6
FPM lipped injection fl ap valve (3/8”)
7
pH Sensor model Z35H1P-17 with 5-meter shielded cable
8
Injection fl ap 1/2” to 3/8” valve reducer
9
Sensor holder, model PSS3 (1/2”)
10
-
11
Collar for fi xing the injection valve and sensor holder (DN 50 mm)
12
Buffer solution kit pH 4, pH 7, H
2
O (tap water only)
1
1
2
3
4
5
6
7
8
9
10
11
12
2
1.2 The Control Panel
1
2
3
4
5
6
7
8
9
10
11
12
13
1
Blue Backlighted LCD 1 line 16 white character screen.
Left side warning zone (alarms) / Right side pH display
2
Peristaltic pump.
3
Connection for linking polyethylene inlet tube.
4
Connection for linking the PVC intake pipe to the suction cane.
5
Cable gland: for passing the control cable directly to the fi lter (220-240V AC only when fi ltration is in
progress).
6
Cable gland: for passing the cable linking the unit to the intake pipe sensor.
7
Cable gland: for passing the 220-240V AC power cable.
8
BNC socket for connecting the pH sensor: The sensor cable is connected to the regulator unit with
this connector.
9
Master switch: for powering the control unit.
10
Navigation button “
q
”: for navigating in the “Settings” menu.
11
“SET/Esc” button: button for exiting from the “Settings” menu; also for displaying the pH set point
when pressed continuously.
12
Navigation button “
p
”for navigating in the “Settings” menu.
13
“CAL/Enter” button: button for enabling the sensor calibration mode (the button must be pressed
for 5 seconds). This is also used for accepting changes in the “Settings” menu.
3
20
21
EN
