Zodiac Pacer, Руководство пользователя

Страница: 8 / 20

8
sEcTION 2 – cORREcT sETTINgs
ADjusTMENT sETTINgs
You will only need to adjust the Auto Weir Valve if the following occurs:
AuTO WEIR vAlvE
The Zodiac
®
Auto Weir valve is preset at the factory to
obtain maximum pool cleaning efficiency. Your PACER™ is
preset on setting 2. However, if you do experience difficulties, it can
be manually adjusted to one of the three settings (high, medium or low –
See Adjustment Suggestions below).
NOTE : To obtain maximun
Diaphragm efficiency, please
ensure a genuine Zodiac
Auto Weir Valve is used.
®
NOTE: To obtain maximum
Diaphragm efficiency, please
ensure a genuine Zodiac
®
Auto Weir Valve
with 90˚ Elbow
You no longer
need to remove
the ZODIAC
Auto Weir Valve
from the weir.
Simply depress the red pivoted arm (A), until it
locks open the flow door.
To recommence pool cleaner operation, release the
pivoted arm (A) by pressing down on the flow door
(B). It’s that simple!
TURNING YOUR PACER™ OFF IS MADE EASY
WITH THE AUTO WEIR VALVE
3
2
1
1. Low Setting 2. Medium Setting 3. High Setting
This end plugs
into the weir Hose or 90˚
Elbow attaches to
this end
2 1
Water Flow
Your PACER™ Pool Cleaner
is performing too fast and/or
climbing above the level of
the water.
Reduce Auto Weir Valve to
medium(2) or low(1)
setting
Your PACER™ Pool Cleaner
is performing slowly and/or
not climbing the pool walls.
Increase Auto Weir Valve to
medium(2) or high(3)
setting