11
sEcTION 3 – REMOvAl AND REFITTINg
OF ThE DIAPhRAgM
2. PRoCEduRE to REfit
diAPhRAgm.
Slide the Inner Extension Pipe with
the diaphragm into the suction hole
until the Diaphragm fits snugly into
the groove provided (diagram 9a).
Make sure the diaphragm is vertical
and that the gap of the throat is not
excessive. Tighten Hand-nut securely.
REsET DIAPhRAgM
If the gap of the throat is excessive
(more than 5mm), yet the Diaphragm
is not torn or damaged, push down
lightly on the Inner Extension Pipe so
as to close the gap slightly and hold in
place before tightening the Hand-nut
(diagram 9b). Re-install pool cleaner
and switch on pump.
NOTE: The procedure of removing
and refitting the Diaphragm could, in
itself, rectify a performance problem,
eg. working erratically, as it resets the
diaphragm to its correct length.
Diagram 9
9a
9b
Содержание Pacer
Страница 1: ...1 ...
