Zodiac NZO 700, Руководство пользователя, Страница: 21 / 68

Page 21/68
E
N
G
L
I
S
H
BUOYANCY CHAMBER – Assembling the buoyancy
chamber on the hull
II-1-INSTALLING THE BUOYANCY CHAMBER ON THE HULL
The buoyancy chamber is delivered installed on the hull. Follow the instructions below when
replacing the buoyancy chamber.
NOTE:
The buoyancy chamber is fitted to the hull with the buoyancy
chamber deflated.
You can inflate the non-installed buoyancy chamber (pressure
240mb) and let it stabilize for around one hour. Then deflate it.
If the buoyancy chamber was stored at a temperature lower than
0°C, leave it for 12 hours at room temperature (20°C) before
folding it.
1
To facilitate the positioning of the buoyancy chamber, apply liquid soap (a) to the hull rails
2
Position the buoyancy chamber’s rope (a) on the hull’s rail (b) situated at the forward end
of the hull. Pull the buoyancy chamber until the mini-boltrope is brought opposite the
forward rail (c).
a
c
b