Zodiac Nature 2 Express, Инструкция по эксплуатации и гарантийный талон

Страница: 7 / 17

INSTALLATION
3. The Zodiac Nature
2
Express System can be installed
vertically or horizontally, even upside down - whichever
is most convenient for your pool installation.
4. Make sure you turn off the pump and filter system and
shut off valves to avoid emptying pool.
5. To install and assemble the Zodiac Nature
2
Express
unit, choose a position after the filter but before any
chlorine injection system or salt water chlorination
system, that may be fitted to your pool system.
6. Position the top shell and clamp on the place chosen,
with the gasket supplied, fitting between the top clamp
and the pipe to make a good seal. Place the bottom
clamp on the other side of the pipe and bolt the two
halves together, with the four stainless steel nuts and
bolts supplied. Make sure that the arrows on the top
clamp are facing in the direction of the water flow back
to your pool
7. Using the hole saw and with the use of a drill, drill a
hole in the pipe through the opening at the bottom of
the top shell, place the flow director into the hole, at
the bottom of the top shell making sure it fits into the
slot the right way. The inside curve of the flow director
must face towards the water flow from the filter, then
screw cartridge into the unit and set date or installation
on dial.
8. Turn pump on and check for any leaks.
3