10
3.4 I Adjusting the water flow
•
The filtration pump must be operating.
•
Check the water flow regularly to ensure the best possible cleaning performance and to make it easier for the cleaner
to climb the sides.
•
The cleaner is equipped with a flow regulator valve which automatically adjusts the water flow through the cleaner. It
indicates whether the water flow is ok or excessive:
YELLOW
= flow ok /
RED
= flow excessive
: Flow regulator valve
: Control
3.4.1 Checking the wheel rotation speed
•
The filtration pump must be operating.
•
Switch on the filtration pump (have a stopwatch ready).
•
Raise the cleaner to below the surface of the water, keeping it submerged.
• Note the yellow indicator on the rear right wheel
(see image ).
•
For MX8 - MX8 PRO - MX9 - MX930 - MX10: Wait until the wheels change direction and log the time until the wheels
have performed 10 turns (see image ).
•
Adjust the water flow according to the time logged (see image ).
10 tours
Seconds
26-50
20-25
10-19
Increase the flow
Flow ok
Reduce the flow
3.4.2 Adjusting the water flow
•
Adjust the water flow using the flowkeeper valve provided with the device (see image ), or from the pool valves.
(+) Increase the flow
(-) Reduce the flow
