Page 6
ENGLISH
Zodiac
®
JXi
™
Gas-Fired Pool & Spa Heater
|
Installation & Operation Manual
Section 2. Getting Started
Install the JXi in accordance with the procedures in this
manual, local codes and ordinances, and in accordance
with the latest edition of the appropriate national code.
See
Section
1.7
.
If the heater is to be operated in below freezing
conditions it should be installed in a protected outdoor
shelter. See
Section
3.3
All gas-fi red products require correct installation to
ensure safe operation. The requirements for pool heaters
include the following:
•
Field assembly (if required)
•
Appropriate site location, clearances and fl ooring see
Section 3
•
Suffi cient combustion and ventilation air
• Properly sized gas meter and piping
• Proper electrical wiring
•
Suffi cient water fl ow
This manual provides the information needed to meet
these requirements. Review all applications and
installation procedures before continuing the installation.
2.1
Package Contents
Before completely unpacking the unit please
inspect carton for damage. In addition please
check the carton label to ensure that you have the
correct specifi cations for your application.
Item Description
Qty.
1
JXi Heater
1
2
Versa Plumb™ Sweep Elbow
1
3
50 mm (2”) Universal Union Tailpiece
2
4
50 mm (2”) Universal Union Cap
1
5
50 mm (2”) Universal Union O-ring
3
6
50 mm (2”) Universal Union Nut
3
1
2
3
4
5
6
NOTE:
1 EA of item 4, item 5 and
item 6 will come pre-installed at
the horizontal manifold inlet.
