1
Figure 12. Submerge and Remove Trapped Air
2
4.
Spread the floating cable over the pool, making
sure there are no kinks or coils in the cable .
NOTE:
Allow enough floating cable to reach across
the farthest length of the pool but do not let
excessive cable in the pool. Excessive cable
length may cause tangling or affect the cleaning
pattern (see Figure 13).
control unit
Max
Floating Cable
Length
control unit
cleaner
cleaner
Recommended
entry point
Not
Recommended
Figure 13. Spread Floating Cable Across Farthest
Distance of the Pool
3.3 Starting the Cleaner
The first time you use the cleaner, the cleaning surface
default setting is Floor and Wall
After the first time, the default is the last setting used.
Select Cleaning Surface:
• Use
to change cleaning surface setting.
Begin Cleaning:
•
After selecting the cleaning surface,
press
to begin operation.
•
At the beginning of the cycle, the cleaner
remains in place for a few seconds to initialize
the microcontroller after the fan motor starts.
9
H0574000_REVA
