Zodiac CAE, Руководство по установке, Страница: 11 / 28

10
Starting up and stopping the appliance
Press for 5 seconds.
Locking/unlocking the keyboard
To lock and unlock the keyboard:
- Hygro Control must be active,
- press and simultaneously for 3 seconds,
- the message is displayed or is removed.
Adjusting the reference values
- Hygro Control must be active,
- press for 3 seconds, the modifiable value blinks,
- use or to set the value,
- press to validate,
- and then to exit.
Value range minimum maximum Comfort setting
Humidity 55% 70% 65%
Temperature 5 °C 32 °C 28°C
Test mode / Manual override
To force the appliance to operate for 30 minutes, even if the pool hall conditions do not trigger the
request:
- Hygro Control must be active,
- press on for 3 seconds, a value blinks,
- press again for 10 seconds,
- all the digits light , or and the appliance starts up.
Parameter setting in hygro-thermostat or hygrostat mode
- Hygro Control must be on standby,
- press and for 3 seconds : (hygro-thermostat mode),
- press or to select the function: (hygrostat mode),
(thermostat mode)
- validate by pressing .
Hygro Control shipped with the setting for hygro-thermostat mode for appliances with the
heating option for hygrostat mode for devices without the heating option.
This setting must be changed if a heating option is added or removed.
To quit this mode, press the button for 5 seconds.
If the keyboard is not used for 30 seconds, the setting will be abandoned and the last
(non validated) setting will not be taken into account.
EN