P a g e
|
5
Figure 16.
Locking Ring Level ...............................13
Figure 17.
Connecting Cell Leads...........................13
Figure 18.
Pod Connector .......................................13
Figure 19.
Bonding Wire ........................................13
Figure 20.
Bonding Wire Attached to Power Pack .13
Figure 21.
Bonding Lug Locations .........................13
Figure 22.
Example of Bypass Installation .............14
Figure 23.
New Pool Plumbing for
In-Floor Systems....................................15
Figure 24.
Example of Alternative Installation.......15
Figure 25.
Accessing and Wiring to the
Power PCB ............................................17
Figure 26.
Communication Wiring between
Power Pack and AquaLink™ RS Control System
or PDA Network ....................................17
Figure 27.
Control Panel on the Power Pack ..........23
Figure 28.
Undo Locking Ring ...............................26
Figure 29.
Remove the Cell ....................................26
Figure 30.
Invert the Cell ........................................26
Figure 31.
Installing the Winterizing Caps .............27
Figure 32.
Locking Ring Level ...............................27
Figure 33.
Cell Exploded View...............................33
Figure 34.
Pod Exploded View ...............................33
Figure 35.
Power Pack, Locking Ring Tool,
and Winterizing Cap ..............................33
Tables
Table 1.
Approximate Kilograms (Pounds)
of Salt Needed to Obtain
4000 ppm (4.0 gpl) ................................21
Table 1.
Approximate Kilograms (Pounds)
of Stabilizer Needed to Obtain
50 ppm ..................................................22
