ZNYX
Networks
NetBlaster ZX222 PMC Fast Ethernet Adapter · User’s Guide
Page 8
Appendix A: Legal Notices and Certification
CLASS 1 LASER Product:
Complies with 21 CFR 1040.10 and 1040.11.
FCC Class A Notice:
N
ET
B
LASTER
ZX222
Modification to this product not authorized by ZNYX Corporation could void the FCC
approval and negate your authority to operate the product.
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if it is not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will
be required to correct the interference at his own expense.
Canada Compliance:
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numeriqué de la classe A est conforme à la norme NMB-003 du Canada.
CE Conformity:
The ZX222 is in compliance to CE testing according to the following standards with respect to
the stated level and given criteria:
EN55022
EN50082-1
EN55022(1998)
Class A
EN61000-4-2 (1995)
4kV (Contact Discharge) and 8kV (Air Discharge)
EN61000-4-3 (1995)
3V/m
ENV 0204 (1995)
EN61000-4-4 (1995)
1kV (power Supply) and 0.5 kV (I/O Cables)
EN61000-4-5 (1995)
1kV (Line to Line) and 2kV (Line to Ground)
EN61000-4-6 (1996)
3Vrms
EN61000-4-11 (1994) 0%, 40%, 70% of U
T
, voltage dips +/-10% voltage variations
THIS ADAPTER CARD IS FOR USE ONLY WITH PMC BUS COMPATIBLE SYSTEMS
THAT HAVE ENCLOSED POWER SUPPLIES WITH SELV OUTPUTS AND
INSTALLATION INSTRUCTIONS DETAILING USER INSTALLATION OF CARD
CAGE ACCESSORIES.
Manufacturer Name: ZNYX Corporation
Manufacturer Address: 48501 Warm Springs Boulevard, Suite 107
Fremont, CA 94539
