www.znshinesolar.com
Document No.
:
QES/ZX-RD-III032A
- 3 -
3
、
UNLOAD/TRANSPROTATION/STORAGE
Precautions and general safety rules:
(
1
)
Modules should be stored in a dry and ventilated environment to avoid direct sunlight and moisture and
extra precautions should be taken to prevent connectors from being exposed to moisture or sunlight, like using
connector endcaps.
(
2
)
The modules should be stored in the original ZNSHINE SOLAR package before installation. Protect the
package from damage. Unpack the modules as per the recommended unpacking procedures. The whole process
of unpacking, transport and storing should be handled with care.
(
3
)
Before installation, ensure that all modules and electrical contacts are clean and dry
。
(
4
)
Unpacking must be carried out by two or more persons at the same time.
(
5
)
Handling the modules requires two or more people with nonslip gloves and both hands.
(
6
)
Do not lift modules by their wires or junction box.
(
7
)
Do not handle the modules over-head or stack the modules.
(
8
)
Do not place excessive loads on the module or twist the module.
(
9
)
Do not drop or place objects (such as tools) on the modules.
(
10
)
Do not put the modules in a place that is not supported or stable.
(
11
)
Do not allow the modules to come in contact with sharp-pointed objectives to prevent them from
scratches, avoiding a direct impact on the safety of modules.
(
12
)
Do not expose the modules and its connectors to any chemical substance (e.g. oil, lubricant, pesticide,
etc.).
(
13
)
Before the secondary transportation vehicle is started, it should be bundled with net ropes. The rope
should be fastened to prevent damage to the modules during the transportation. The speed of the vehicle carrying
the modules should be
≤
5 km/h.