www.znshinesolar.com
Document No.
:
QES/ZX-RD-III032A
- 17
60/66/120/132pcs
double-glass
+1600Pa/-1050Pa
1.5
A=1/5L±50mm
;
L=Module width
*NOTE:
1. The crossbeam is perpendicular to the short side frame.
This installation may cause the cell covered, so ZNSHINE
SOLAR does not recommend this installation for Framed
Bifacial double-glass.
2. The above described distance is from the module edge
to the middle of the clamp.
Clamps length
≥
80mm.
3. Need two support rails below the PV module to make
sure the Mechanical load.
4. The load is an empirical value of a standard module
based on a standard installation mode, and the specific
information shall be consulted by ZNSHINE SOLAR.
60/66/72/120/132/144pcs
bifacial double-glass
+1600Pa/-1600Pa
1.5
A=1/4L±50mm
;
C=10±2mm
;
L=Module length
*NOTE:
1. The beam is parallel to the long side.
2. The above described distance is from the module edge
to the middle of the clamp.
Clamps length
≥
80mm.
3. Need two support rails below the PV module to make
sure the Mechanical load.
4. The load is an empirical value of a standard module
based on a standard installation mode, and the specific
information shall be consulted by ZNSHINE SOLAR.