www.znshinesolar.com
Document No.
:
QES/ZX-RD-III032A
- 15
C. 2V Installation Method
The single module is installed with two φ7*10mm mounting holes and twoφ9*14mm mounting holes, as
shown in figure 5-5. The overall installation method is shown in the table below.
Figure 5-5: Mounting holes schematic of the single module for the 2V installation method
Module
Mechanical Load
Pressure
Safety
factor
Mounting Direction
60/66/72/120/132/144 pcs
double-glass
60/66/72/120/132/144 pcs
bifacial double-glass
+1600Pa /-1600Pa
1.5
*NOTE:
The load is an empirical value of a standard module based on a standard installation mode, and the specific
information shall be consulted by ZNSHINE SOLAR.