Zmotion XPLC300, Руководство пользователя

Страница: 24 / 41

XPLC300 Motion Controller Hardware Manual V1.5
→
Communication Cable Requirements
Both ETHERNET communication interface and EtherCAT communication interface
adopt standard Ethernet RJ45 interface.
The network cable adopts Category 5e STP, and the crystal head has a metal shell to
reduce interference and to prevent information from being eavesdropped. As shown below:
Item Specification
Cable type Flexible crossover cable, Category 5e
traverse twisted pair
Line pairs 4
Isolation cross skeleton
Connector Crystal head with iron shell
Cable material PVC
Cable length Less than 100m
Use RJ45 network cable connection method:
⚫ When installing, hold the crystal head that is with the cable and insert it into the RJ45
interface until it makes a "click" sound (kada).
⚫ In order to ensure the stability of communication, please fix the cables with cable ties.
⚫ When disassembling, press the tail mechanism of the crystal head, and pull out the
connector and the module in a horizontal direction.
Please use tube-type pre-insulated terminals and cables with appropriate wire
diameters to connect the user terminals.