CONTROLS AND INDICATORS
Options can add enhancements to the cycle selected.
7. DISPLAY - Shows the remaining hours and minutes of the current cycle, delay
hours remaining, and error codes (see “Error Codes” on page 56).
8. Rinse Aid - Turns on when you need to add rinse aid.
9. Sanitized - Turns on when a sanitized cycle is finished. Turns off after 30
seconds, when the door is opened.
10. Clean - Turns on after a cycle finished. Turns off after 30 seconds when the
door is opened.
11. DELAY - Press repeatedly to delay the start of the selected wash cycle until the
delay time you want is shown on the display. “H” will show. This is not an error
code. You can select from one to 24 hours delay. After you select the delay
time you want, press START/CANCEL once, then close the door within four
seconds. The delay begins to count down. If you open the door while delay is
running, press the START/CANCEL, then close the door within four seconds to
begin the cycle from that point. To cancel the delay and begin the cycle before
the delay period is complete, open the door, then press and hold DELAY for
three seconds.
OPTIONS
12. HEATED DRY - Use to heat-dry your dishes. This function is not available for
rinse only cycle.
13. SANITIZE - Use to sanitize your dishes and glassware. Maintains the water
temperature at158° F max., and is available with the AUTO, NORMAL, and
HEAVY cycles.
Note:
• Certified residential dishwashers are not intended for licensed food establishments.
OPERATION
40
Contr
ol P
anel
