PROBLEM
POSSIBLE CAUSE
POSSIBLE SOLUTION
The dishwasher
won’t start
The door may not be closed
properly.
Make sure that the door is
closed and latched.
The power is off or not
connected.
Make sure that the power is
connected and turned on.
The delay start option is selected. Refer to the “Delay” section
under “Controls and indicators”
on page 40.
The dishwasher
beeps at the end
of the cycle
This is normal and indicates
that the wash cycle is complete.
The rinse aid light
is on
The rinse aid level is low.
Add rinse aid.
The dishwasher
runs too long
The dishwasher is connected to a
cold water supply.
Make sure that the dishwasher is
connected to a hot water supply.
If not, change the water supply
to a hot water source.
The cycle time varies, depending
on the soil level of the dishes.
When heavy soil is detected, the
wash times will be longer.
Depends on the option selected. Some options will add time to
the cycle.
TROUBLESHOOTING
57
Tr
oublesh
ooting
