36
OPERATION
OVERFLOWING WARNING
If the dishwasher intakes too much water or there are leaks, the dishwasher will detect
this and “F1” will flash on the display. As long as overflowing continues, the dishwasher's
overflow protector will remain active. If overflowing stops and safety is assured, “F1” will
disappear. If “F1” does not disappear, there is a permanent fault. In this case, an authorized
service provider should be contacted.
MAINTENANCE AND CLEANING
WARNING
Before cleaning or carrying out maintenance, switch off the appliance,
disconnect the main plug, and turn off the water tap.
NOTE
: The dishwasher should only be repaired by an authorized service agent. Do not try
to repair the dishwasher beyond Troubleshooting recommendations in this manual.
WARNING
All surfaces are susceptible to scratching. Contact with unsuitable cleaning
agents can alter or discolor all surfaces.
WARNING
Keep the floor around the dishwasher clean and dry to prevent any possible
injury. Keep the dishwasher clean and empty and the door cracked open to
allow air to circulate in case of any extended unused time.
• The dishwasher door can be damaged by abrasive cleaners, scouring pads, and
abrasive cloths. Cleaning the dishwasher in regular intervals prolongs the dishwasher’s
service life.
• Unplug the dishwasher and turn off its tap before starting any cleaning.
• Do not use any cleaning supplies that contain metals or any type of abrasives when
cleaning the dishwasher. Wipe with a fine cleaning material and a dampened cloth.
End of Pr
ogr
am